| Both sides previous revision
Previous revision
Next revision
|
Previous revision
|
rv:ram_promaster [2024/04/01 00:16]
frater_secessus [excess capacity at idle] |
rv:ram_promaster [2024/05/13 12:15]
frater_secessus [electrical] |
| |
| Also see [[https://blog.fcanorthamerica.com/2008/02/11/jeep-brake-traction-control-explained/|FCA's description of a similar system]] in the Jeep line. | Also see [[https://blog.fcanorthamerica.com/2008/02/11/jeep-brake-traction-control-explained/|FCA's description of a similar system]] in the Jeep line. |
| ===== electrical ===== | ===== alternator ===== |
| |
| The gasoline PM has either a 180A((Lester 11792)) or an optional 220A Denso-type alternator((Lester 11793)); they are traditional "fixed voltage" and not of the modern "smart" variety. [[https://www.promasterforum.com/threads/alternator-amps.93526/post-737110|This VIN decoder]] will indicate which alternator a van was built with. In either case the six-groove pulley ratio is 2.84:1.((https://www.promasterforum.com/threads/alternator-specs-for-gas-pms.99215/post-794345)) Output when cold is ~14.3v; voltage may be regulated down to ~13.8v when hot. | The gasoline PM has either a 180A((Lester 11792)) or an optional 220A Denso-type alternator((Lester 11793)); they are traditional "fixed voltage" and not of the modern "smart" variety. [[https://www.promasterforum.com/threads/alternator-amps.93526/post-737110|This VIN decoder]] will indicate which alternator a van was built with. In either case the six-groove pulley ratio is 2.84:1.((https://www.promasterforum.com/threads/alternator-specs-for-gas-pms.99215/post-794345)) Output when cold is ~14.3v; voltage may be regulated down to ~13.8v when hot. |
| * [[https://www.promasterforum.com/threads/180-amp-alternator-with-amp-clamp-on-output.99118/post-792681|This post]] on the Promaster forum shares official load estimates for various accessories. | * [[https://www.promasterforum.com/threads/180-amp-alternator-with-amp-clamp-on-output.99118/post-792681|This post]] on the Promaster forum shares official load estimates for various accessories. |
| * [[https://www.promasterforum.com/threads/alternator-charging%E2%80%A6too-complex-for-a-novice.95350/post-755316|This post]] describes the procedure for alternator replacement. | * [[https://www.promasterforum.com/threads/alternator-charging%E2%80%A6too-complex-for-a-novice.95350/post-755316|This post]] describes the procedure for alternator replacement. |
| | * [[https://www.youtube.com/watch?v=KcLaBxzz6ZM|This Promasters Only video]] covers alternator replacement and upgrades |
| * [[https://www.promasterforum.com/threads/alternator-charging-problem.89222/post-686694?nested_view=0|this post]] describes the voltage regulation via ECU | * [[https://www.promasterforum.com/threads/alternator-charging-problem.89222/post-686694?nested_view=0|this post]] describes the voltage regulation via ECU |
| |
| |
| {{https://img.mousetrap.net/pm/pmfuses.jpg?400}} | {{https://img.mousetrap.net/pm/pmfuses.jpg?400}} |
| | |
| | ==== upfitter connection point ==== |
| | |
| | some vans are ordered from with an upfitter connection, which can be tapped for D+ signals, 50-70A B+((depending on year)) , etc. See [[https://www.promasterforum.com/threads/all-the-ram-promaster-upfitter-connector-information-and-pinouts-in-one-file.98176/|this thread]] for details. |
| ===== fuel consumption ===== | ===== fuel consumption ===== |
| |
