User Tools

Site Tools


electrical:solar:panels

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
electrical:solar:panels [2026/05/13 15:06]
frater_secessus [Specifications]
electrical:solar:panels [2026/05/13 15:07] (current)
frater_secessus [Specifications]
Line 177: Line 177:
 Note that in this example the Power (W) rating is 190, which is the Vmp x Imp (28.60 x 6.64 = 189.904W).  Note that in this example the Power (W) rating is 190, which is the Vmp x Imp (28.60 x 6.64 = 189.904W). 
  
-In real world conditions [[electrical:solar:output|power output will likely be less]] than under optimal lab conditions and the Vmp/Voc may not be at the voltage given on the label.  These values will vary due to local conditions like temperature, shade, and sunshine.  An [[electrical:solar:charge_controller|MPPT charge controller]], if present, will sweep the range of voltages regularly to find actual Vmp under the existing conditions.+In real world conditions [[electrical:solar:output|power output will likely be less]] than under optimal lab conditions and the Vmp/Voc may not be at the voltage given on the label.  These values will vary due to local conditions like temperature, shade, and sunshine.  An [[electrical:solar:charge_controller|MPPT charge controller]], if present, will sweep the range of voltages regularly to find actual Vmp/Voc under existing conditions.
  
 ==== temperature coefficient ==== ==== temperature coefficient ====
electrical/solar/panels.txt ยท Last modified: 2026/05/13 15:07 by frater_secessus