User Tools

Site Tools


electrical:solar:panels

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
electrical:solar:panels [2025/12/24 22:58]
127.0.0.1 external edit
electrical:solar:panels [2026/05/13 15:07] (current)
frater_secessus [Specifications]
Line 177: Line 177:
 Note that in this example the Power (W) rating is 190, which is the Vmp x Imp (28.60 x 6.64 = 189.904W).  Note that in this example the Power (W) rating is 190, which is the Vmp x Imp (28.60 x 6.64 = 189.904W). 
  
-In real world conditions [[electrical:solar:output|power output will likely be less]] than under optimal lab conditions and the Vmp may not be at the voltage given on the label.  Vmp will vary due to local conditions like temperature, shade, and sunshine.  An [[electrical:solar:charge_controller|MPPT charge controller]], if present, will sweep the range of voltages regularly to find Vmp under the existing conditions.+In real world conditions [[electrical:solar:output|power output will likely be less]] than under optimal lab conditions and the Vmp/Voc may not be at the voltage given on the label.  These values will vary due to local conditions like temperature, shade, and sunshine.  An [[electrical:solar:charge_controller|MPPT charge controller]], if present, will sweep the range of voltages regularly to find actual Vmp/Voc under existing conditions.
  
 ==== temperature coefficient ==== ==== temperature coefficient ====
electrical/solar/panels.1766617120.txt.gz ยท Last modified: 2025/12/24 22:58 by 127.0.0.1