User Tools

Site Tools


electrical:solar:pvwatts_assumptions

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
electrical:solar:pvwatts_assumptions [2025/04/12 13:45]
frater_secessus
electrical:solar:pvwatts_assumptions [2025/04/22 13:44] (current)
frater_secessus [DC-DC assumptions]
Line 1: Line 1:
-Assumptions made in the PVwatts estimate:+====== solar assumptions ====== 
 + 
 + 
 +Assumptions made in the [[electrical:solar:pvwatts|PVwatts]] estimate:
  
   * flat-mounted((no tilt)), air-gapped panels((mounted with space underneath them to allow [[electrical:solar:output#panel_temperature|cooling]]))   * flat-mounted((no tilt)), air-gapped panels((mounted with space underneath them to allow [[electrical:solar:output#panel_temperature|cooling]]))
Line 6: Line 9:
  
  
 +These averages are based on insolation and meteorological data for many years and are specific to that location.  Actual daily harvest will vary, so [[electrical:solar:overpaneling#vs_charge_controller|overpanel]] if you can and have sufficient battery bank capacity to [[electrical:autonomy|get you through temporary lulls in harvest]]. 
 +
 +====== DC-DC assumptions ======
 +
 +  * 50A DC-DC, which the alterator can power and batteries accept
 +  * assuming average voltage of 13.0v for Amps-to-Watts conversion.  
electrical/solar/pvwatts_assumptions.1744479919.txt.gz · Last modified: 2025/04/12 13:45 by frater_secessus