This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
electrical:solar:rationing [2017/11/22 01:19] frater_secessus |
electrical:solar:rationing [2020/10/11 23:48] (current) |
||
|---|---|---|---|
| Line 6: | Line 6: | ||
| Here are some examples: | Here are some examples: | ||
| + | |||
| + | * smaller solar installations | ||
| * a stretch of rainy days | * a stretch of rainy days | ||
| * a forest campsite with no good access to sunlight | * a forest campsite with no good access to sunlight | ||
| * smoke from forest fires | * smoke from forest fires | ||
| * very short winter days | * very short winter days | ||
| + | |||
| Line 32: | Line 35: | ||
| * size the inverter to meet the needs of your biggest loads. | * size the inverter to meet the needs of your biggest loads. | ||
| * use MSW unless your intended uses need PSW; MSW have lower parasitic draws. | * use MSW unless your intended uses need PSW; MSW have lower parasitic draws. | ||
| - | * open your refrigerator as little as possible after sundown | + | * open your [[food: |
| * [[food: | * [[food: | ||
| Line 40: | Line 43: | ||
| ===== maximizing solar harvest ===== | ===== maximizing solar harvest ===== | ||
| - | * ensure the panels are not shaded by natural obstructions: | + | * ensure the panels are not shaded by //natural// obstructions: |
| - | * ensure the panels are not shaded by obstructions on your own RV: antennas, A/C units, vents, etc. One way to minimize shading is to park so that the **greatest expanse of panel is facing south** and any obstructions are on the north side of the van. | + | * ensure the panels are not shaded by // |
| * tilt panels if possible | * tilt panels if possible | ||
| * ensure no tarps, awnings or other obstructions are preventing cooling breezes from passing under/over the panels; | * ensure no tarps, awnings or other obstructions are preventing cooling breezes from passing under/over the panels; | ||
| * framed panels (mono and poly) should be mounted with some space underneath them for cooling airflow. | * framed panels (mono and poly) should be mounted with some space underneath them for cooling airflow. | ||
| * clean the solar panels. | * clean the solar panels. | ||
| - | + | * [[electrical: | |
| + | * invest in [[electrical: | ||
| + | * install [[electrical: | ||
| + | * use [[electrical: | ||