Both sides previous revision
Previous revision
Next revision
|
Previous revision
|
electrical:solar:status [2024/08/19 12:12] frater_secessus |
electrical:solar:status [2024/08/22 17:22] (current) frater_secessus [then observe the controller] |
| |
- NON-ISSUE: the battery bank is already charged | - NON-ISSUE: the battery bank is already charged |
- NON-ISSUE: the battery bank was charged and is settling toward the rebulk setpoint (ie, no-float charging profile). | - NON-ISSUE: the battery bank was charged in [[electrical:solar:status#setups_with_no_float|a no-float charging profile]] and is settling toward the rebulk setpoint |
- ISSUE: the panels are shaded((don't do that)) | - ISSUE: the panels are shaded((don't do that)) |
- ISSUE: there is a connection issue between the panels and controller | - ISSUE: there is a connection issue between the panels and controller (if it worked in the past) |
- ISSUE: the panels are incorrectly spec'ed for the controller (probably has never worked) | - ISSUE: the panels are incorrectly spec'ed for the controller or wired in a way to make it so (probably has never worked) |
| |
| |
| |
* **Rover series** - the table on page 37 of [[https://www.renogy.com/content/RNG-CTRL-RVR40/RVR203040-Manual.pdf|the manual]] shows there is no boost duration and no float in the Li profile. The "boost return voltage" field shows **13.2v**. | * **Rover series** - the table on page 37 of [[https://www.renogy.com/content/RNG-CTRL-RVR40/RVR203040-Manual.pdf|the manual]] shows there is no boost duration and no float in the Li profile. The "boost return voltage" field shows **13.2v**. |
* **DC-DC/MPPT combo charger** - the table on page 2 of [[https://www.renogy.com/content/RBC3050D1S-G1/RBC3050D1S-Manual.pdf|the manual]] shows there is no boost duration and no float in the Li profile. The "boost return voltage" field shows **13.2v**. | * **DCC-series DC-DC/MPPT combo charger** - the table on page 2 of [[https://www.renogy.com/content/RBC3050D1S-G1/RBC3050D1S-Manual.pdf|the manual]] shows there is no boost duration and no float in the Li profile. The "boost return voltage" field shows **13.2v**. |
| * **RBC40D1S** - the table on p11 of [[https://store-fhnch.mybigcommerce.com/content/RBC40D1S-US/Renogy%2040a%20dcdc%20user%20manual%20v1.0%2020240320.pdf|the manual]] shows there is no float and it rebulks ("recharging") at 13.6v. |
* **DC-DC charger** (20A/40A/60A) | * **DC-DC charger** (20A/40A/60A) |
* page 18 says "lithium batteries will only have an absorption charge and no float charge" | * page 18 says "lithium batteries will only have an absorption charge and no float charge" |