This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
hvac:roof_vent [2020/04/06 17:11] frater_secessus [installation] |
hvac:roof_vent [2022/11/22 08:38] (current) princess_fluffypants [nonstandard vents] |
||
|---|---|---|---|
| Line 4: | Line 4: | ||
| - | The industry standard for RV roof vents is 14" | + | The industry standard for RV roof vents is 14" |
| + | See also [[hvac: | ||
| ===== placement ===== | ===== placement ===== | ||
| There several and sometimes conflicting factors affecting vent placement. | There several and sometimes conflicting factors affecting vent placement. | ||
| - | * for effective **cross-ventilation** throughout the length of the van one would put the fan at the opposite end of the fresh air intake. | + | * for effective **cross-ventilation** throughout the length of the van one would put the fan at the opposite end of the fresh air intake. |
| * for **direct breeze at night the vent** might be placed in the sleeping area.((Or one might just use a portable fan for this.)) | * for **direct breeze at night the vent** might be placed in the sleeping area.((Or one might just use a portable fan for this.)) | ||
| * for **protection from rainfall** at night((no cover, or manually operated fans)), the fan might be placed away from the sleeping area | * for **protection from rainfall** at night((no cover, or manually operated fans)), the fan might be placed away from the sleeping area | ||
| * for **cooking exhaust** the vent would be placed over the cooking area. | * for **cooking exhaust** the vent would be placed over the cooking area. | ||
| + | |||
| + | |||
| + | |||
| + | Some vans have flat (or flat-adjacent) areas to facilitate mounting fans. | ||
| + | |||
| + | * [[http:// | ||
| + | * [[https:// | ||
| + | * The Chevy Express has a mounting pad in the rear.((https:// | ||
| + | |||
| + | If no entirely flat spot is available, one can cut through the corrugations and either use an adapter to seal the gaps or build up the low areas with buytl tape, etc. | ||
| + | |||
| + | ===== installation ===== | ||
| + | |||
| + | * //radius// (round) the corners rather than leaving right angles to prevent stress fractures in the corners. | ||
| + | * [[http:// | ||
| ===== rainproofing ===== | ===== rainproofing ===== | ||
| Line 57: | Line 72: | ||
| The base 3-speed Fantastic model reportedly consumes 1A, 2A, and 3A respectively.((https:// | The base 3-speed Fantastic model reportedly consumes 1A, 2A, and 3A respectively.((https:// | ||
| + | |||
| + | ===== nonstandard vents ===== | ||
| + | |||
| + | Although 14x14" vents are standard in the camper world, there are other (usually smaller) options. The smaller vents often have greatly-reduced flow, as measured in CFM((cubic feet/ | ||
| + | |||
| + | |||
| + | ' | ||
| + | |||
| + | If you have a van with solid rear doors, or a van with a lot of space above the door windows, there are wall-mounted vent fans as well. https:// | ||
| + | ==== mushroom vents ==== | ||
| + | |||
| + | RV-style mushroom vents are typically mounted in 5" to 6.25" holes. | ||
| + | |||
| + | |||
| + | ==== wind-powered vents ==== | ||
| + | |||
| + | [[https:// | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||