User Tools

Site Tools


opinion:frater_secessus:self-heated_lifepo4

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
opinion:frater_secessus:self-heated_lifepo4 [2025/06/24 18:52]
frater_secessus [backing into a minimum temperature setpoint]
opinion:frater_secessus:self-heated_lifepo4 [2026/10/03 20:07] (current)
frater_secessus [Self-heated vs DIY warming]
Line 1: Line 1:
 DRAFT DRAFT
  
-====== Self-heated vs DIY warming ======+====== LiFePO4 charging and freezing temps:  self-heated vs DIY warming approaches ======
  
 ===== TLDR ===== ===== TLDR =====
  
-  * LiFePO4 cannot be charged when the cells are below ~freezing, or discharged well below freezing +  * LiFePO4 cannot be charged when the cells are below ~freezing, or even discharged at substantially lower temps.  
-  * some kind of warming is required before charging+  * therefore when cells are at ~freezing temps some kind of warming is required before charging
      * self-heated:   easier      * self-heated:   easier
-     * DIY:  more control, more charging under certain conditions, usually cheaper +     * externally-heated (usually DIY):  more control, more charging under certain conditions, usually cheaper 
-  * in practice, warming is combined with other forms of protection:  BMS low temp charging shutoff, solar or DC-DC low temp charging cutoff, etc.(("belt and suspenders" approach)) +  * in practice, warming is combined with other forms of protection:  [[electrical:12v:drop-in_lifepo4#bms_features_and_specs|BMS low temp cutoffs]], solar or DC-DC low temp charging cutoff, etc.(("belt and suspenders" approach)) 
 ===== how the approaches work ===== ===== how the approaches work =====
  
opinion/frater_secessus/self-heated_lifepo4.1750791142.txt.gz · Last modified: 2025/12/24 22:52 (external edit)