User Tools
electrical:12v:alternator_details
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
electrical:12v:alternator_details [2024/03/29 19:41] frater_secessus [dual alternators] |
electrical:12v:alternator_details [2024/03/29 19:48] frater_secessus [external regulation] |
||
|---|---|---|---|
| Line 235: | Line 235: | ||
| * temperature monitoring so maximal current can be extracted without overheating | * temperature monitoring so maximal current can be extracted without overheating | ||
| * RPM-based output limits | * RPM-based output limits | ||
| + | * slowly ramping up current to avoid belt slippage/ | ||
| + | * shutoff when commanded by BMS | ||
| + | * CANBUS and other communication | ||
| * etc | * etc | ||
| Line 340: | Line 343: | ||
| Information is limited, but GM factory dual alt setups appear to run the way one would expect in the first place, with load shared between them: | Information is limited, but GM factory dual alt setups appear to run the way one would expect in the first place, with load shared between them: | ||
| - | > The two alternators are controlled over a common circuit from the ECM so they cannot be controlled independently. The ECM cannot shut one down and let the other one run. It is both or neither. | + | > The two alternators are controlled over a common circuit from the ECM so they cannot be controlled independently. The ECM cannot shut one down and let the other one run. It is both or neither.((https:// |
| - | ((https:// | + | |
| + | [[https:// | ||
| ==== DUVAC ==== | ==== DUVAC ==== | ||
electrical/12v/alternator_details.txt · Last modified: 2024/03/29 19:48 by frater_secessus
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
