RV and vandwellers wiki

User Tools

Site Tools

Trace:
electrical:12v:charging

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Last revision Both sides next revision
electrical:12v:charging [2023/06/11 15:06]
frater_secessus [Absorption stage] added tail current 		electrical:12v:charging [2023/07/14 12:13]
frater_secessus [Charging other chemistries] longevity
Line 74: Line 74:
 The absorption stage, sometimes called //acceptance//((which makes sense)) or //boost//((doesn't make sense!)), is a constant voltage stage during which the battery is brought to full charge.  This stage requires a **great deal of time** but decreasing amounts of current.   The absorption stage, sometimes called //acceptance//((which makes sense)) or //boost//((doesn't make sense!)), is a constant voltage stage during which the battery is brought to full charge.  This stage requires a **great deal of time** but decreasing amounts of current.  
  
-Absorption **begins when the battery reaches the absorption voltage** ([[electrical:12v:electrical notation|Vabs]], 14.8v in our example) and **ends when the battery tapers off current acceptance** to something like [[electrical:12v:battery_capacity|C/100]] to C/50((1A-2A per 100AH of capacity)) ("tail current", "End Absorb", "endAmps"),  and/or when a period of time has elapsed.  +Absorption **begins when the battery reaches the absorption voltage** ([[electrical:12v:electrical notation|Vabs]], 14.8v in our example) and **ends when the battery tapers off current acceptance**((that the battery is taking from the charging source)) to something like [[electrical:12v:battery_capacity|C/100]] to C/50((1A-2A per 100AH of capacity)) ("tail current", "End Absorb", "endAmps"),  and/or when a period of time has elapsed.  
  
 Example:  if you have a 100Ah battery bank and the manufacturer states that endAmps is C/100, then the battery is fully charged when it is only accepting 1A of current((100Ah/100 = 1A)) **at Vabs**.  An endAmps recommendation of C/200 would be the battery accepting 0.5A of current.((100Ah/200 = 0.5A)) at Vabs.   Example:  if you have a 100Ah battery bank and the manufacturer states that endAmps is C/100, then the battery is fully charged when it is only accepting 1A of current((100Ah/100 = 1A)) **at Vabs**.  An endAmps recommendation of C/200 would be the battery accepting 0.5A of current.((100Ah/200 = 0.5A)) at Vabs.  
Line 152: Line 152:
   - Float voltage - Li does not like to sit at 100% SoC,((the cells degrade faster at 100%+ SoC)) so a float voltage in the 13s allows them to come down off the peak and rest at a healthier voltage for them while still holding useful capacity.   - Float voltage - Li does not like to sit at 100% SoC,((the cells degrade faster at 100%+ SoC)) so a float voltage in the 13s allows them to come down off the peak and rest at a healthier voltage for them while still holding useful capacity.
  
-Also see [[electrical:12v:lifepo4_batteries_thread#charging|LiFePO4 (lithium) bare cell charging]]. +Also see [[electrical:12v:lifepo4_batteries_thread#charging|LiFePO4 (lithium) bare cell charging]] and [[electrical:12v:drop-in_lifepo4#an_approach_to_greater_longevity|thoughts about charging LFP gently]].
  
 ===== Equalization ===== ===== Equalization =====
electrical/12v/charging.txt ยท Last modified: 2023/09/16 12:22 by frater_secessus

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International

affilliate disclosure

CC Attribution-Noncommercial-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki