Differences

This shows you the differences between two versions of the page.

--- electrical:12v:eternal_absorption [2021/05/05 10:58]
frater_secessus [workarounds]
+++ electrical:12v:eternal_absorption [2021/05/05 11:00]
frater_secessus [workarounds]
@@ Line 22: / Line 22: @@
-  * if duration setpoint is maxxed then [[electrical:12v:eternal_absorption|set Vfloat == Vabs]].  Absorption duration will effectively be "until the sun goes down".
+  * if duration setpoint is maxxed then **set Vfloat == Vabs**.  Absorption duration will effectively be "until the sun goes down".
   * **charge at a lower current** (charging minimum).  While [[opinion:frater_secessus:charging_faster|overall charging will take about the same amount of time]], Bulk's share of that time will increase and [[electrical:12v:charging#absorption|Absorption will take somewhat less time]].
   * **Absorb at a higher((but still manufacturer-sanctioned)) voltage** (Vabs), this will decrease Absorption duration.  Keep a close watch on water levels for flooded batts, and also mind the max allowable voltage for AGM/Gel.

RV and vandwellers wiki