electrical:12v:voltage_sag
Differences
This shows you the differences between two versions of the page.
Both sides previous revision
Previous revision
Next revision
|
Previous revision
|
electrical:12v:voltage_sag [2022/03/16 14:05] frater_secessus [adjust charging setpoints] |
electrical:12v:voltage_sag [2024/03/10 13:58] (current) frater_secessus [networked shunt] |
Example: The absorption setpoint (Vabs) is 14.0. The sensed battery voltage is only 13.8v, so the controller actually puts out 14.2v.((or whatever it takes to get 14.0v at the battery)) | Example: The absorption setpoint (Vabs) is 14.0. The sensed battery voltage is only 13.8v, so the controller actually puts out 14.2v.((or whatever it takes to get 14.0v at the battery)) |
| |
Some sense "wire" are wireless (https://amzn.to/3IbnnQg|[[Victron Smart Battery Sense]]) | Some sense "wire" are wireless ([[https://amzn.to/3IbnnQg|Victron Smart Battery Sense]]) |
| |
| |
Some controllers use networked [[electrical:12v:battery_monitor|battery monitors]] to report back what the battery voltage is in reality. | Some controllers use networked [[electrical:12v:battery_monitor|battery monitors]] to report back what the battery voltage is in reality. |
| |
Example: [[https://amzn.to/3tiqlhu|Victron Lynx shunt]]. [[https://amzn.to/3qbfcNJ|Victron VEbus smart dongle]]. [[https://amzn.to/3ijF6u9|Victron BMV-712]]. | Examples: |
| |
| * [[https://amzn.to/3tiqlhu|Victron Lynx shunt]] |
| * [[https://amzn.to/3qbfcNJ|Victron VEbus smart dongle]] |
| * [[https://amzn.to/3ijF6u9|Victron BMV-712]]. |
| |
| |
electrical/12v/voltage_sag.1647453958.txt.gz · Last modified: 2022/03/16 14:05 by frater_secessus