User Tools

Site Tools


electrical:inverter

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
electrical:inverter [2024/04/18 00:01]
frater_secessus [Inverters]
electrical:inverter [2024/04/20 22:18] (current)
frater_secessus [efficiency]
Line 18: Line 18:
 Inverting from DC to your local shore power spec will necessarily incur losses.  These might be 10-30%, depending on the inverter, the inverter's efficiency spec, etc.  In the absence of hard information you might use 20% losses as a rule of thumb.  This means it will require 20% more power to run your load than the rating spec. Inverting from DC to your local shore power spec will necessarily incur losses.  These might be 10-30%, depending on the inverter, the inverter's efficiency spec, etc.  In the absence of hard information you might use 20% losses as a rule of thumb.  This means it will require 20% more power to run your load than the rating spec.
  
-50w 0.8 efficiency = 60w demanded from the system+50w 0.8 efficiency = 60w demanded from the system
  
  
electrical/inverter.txt ยท Last modified: 2024/04/20 22:18 by frater_secessus