Differences

This shows you the differences between two versions of the page.

--- electrical:solar:charge_controller [2023/09/26 11:25]
frater_secessus [how to choose]
+++ electrical:solar:charge_controller [2023/11/27 12:28]
frater_secessus [DDCCC]
@@ Line 182: / Line 182: @@
 [note:  this is a placeholder for a possible new entry.]
 There are //DC-DC converting charge controllers// (DDCCC) appearing on the market that claim to be MPPT but do not actually track power points (maximum or otherwise).  They do downconvert some excess voltage into amperage.  See [[https://boondockplan.wordpress.com/2017/12/15/backchannel-dc-dc-converting-charge-controllers/|this blog post]].
+==== boosting ====
+Most charge controllers that convert voltage do it by //bucking// (reducing) panel voltage down to the appropriate charging voltages.((normal PWM don't reduce/convert voltage in the normal sense;  they run the panels ~at bank voltage))
+//Boosting// (voltage-increasing) controllers do exist ([[https://amzn.to/3Rh6QSu|example]]) but they are niche products.  In most cases it makes more sense to increase panel voltage with serial wiring.
 ==== how to choose ====
 **PWM is a reasonable default choice** in typical scenarios((12v house power, 12v panels)); they work well enough and are inexpensive. PWM controllers can cost half or a third of their MPPT workmates for any given rated output.((10A, 20A, 40A, etc))

RV and vandwellers wiki