RV and vandwellers wiki

User Tools

Site Tools

Trace:
electrical:solar:charge_controller

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Last revision Both sides next revision
electrical:solar:charge_controller [2023/11/27 12:28]
frater_secessus [DDCCC] 		electrical:solar:charge_controller [2024/02/16 23:32]
frater_secessus [how to choose] added video
Line 29: Line 29:
 Regardless of type, controllers will have several specifications in common.  Regardless of type, controllers will have several specifications in common. 
  
-  * **rating (or "size")** - this is usually the maximum output the controller can produce (charging + loads).((for technical reasons with PWM this will also be the *input* current limit))+  * **rating (or "size")** - this is usually the maximum output in A (amps) the controller can produce (charging + loads).((for technical reasons with PWM this will also be the *input* current limit))
   * **12v/24v/48v** - this refers to the nominal voltage of the battery bank it will be charging.    * **12v/24v/48v** - this refers to the nominal voltage of the battery bank it will be charging. 
   * **Maximum input voltage** - the highest voltage the controller should //ever// see from the solar array.((it is common to leave ~20% margin))  NOTE: a 50v input max does //not// mean a PWM controller can make efficient use of mismatched panel/battery voltages; that requires MPPT.  See [[#how_to_choose|how to choose]] below.   * **Maximum input voltage** - the highest voltage the controller should //ever// see from the solar array.((it is common to leave ~20% margin))  NOTE: a 50v input max does //not// mean a PWM controller can make efficient use of mismatched panel/battery voltages; that requires MPPT.  See [[#how_to_choose|how to choose]] below.
Line 197: Line 197:
 **MPPT is effectively required** when: **MPPT is effectively required** when:
   * when one needs to squeeze every watt out of the panel   * when one needs to squeeze every watt out of the panel
-  * using panels with nominal voltages higher than the battery bank voltage, like 24v panels with a 12v bank.   To be fair, [[http://mouse.mousetrap.net/blog/2021-07-09-solar-back-online-.html#pwm-spare-saved-my-bacon|one really can use higher-voltage panels with PWM and 12v banks]] -- they just end up running at about half power.    +  * using panels with nominal voltages higher than the battery bank voltage, like 24v panels with a 12v bank.   To be fair, [[http://mouse.mousetrap.net/blog/2021-07-09-solar-back-online-.html#pwm-spare-saved-my-bacon|one really can use higher-voltage panels with PWM and 12v banks]] -- they just end up running at about half power.  [[https://www.youtube.com/watch?v=V2b7z2eTb5o|Demonstration video from AltE]].
   * space available for panels is limited, as on a sailboat or small vehicle   * space available for panels is limited, as on a sailboat or small vehicle
   * daytime loads are hampered by [[electrical:solar:pwm_tweaking|PWM Vbatt hobbling]]   * daytime loads are hampered by [[electrical:solar:pwm_tweaking|PWM Vbatt hobbling]]
electrical/solar/charge_controller.txt ยท Last modified: 2024/04/16 20:28 by frater_secessus

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International

affilliate disclosure

CC Attribution-Noncommercial-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki