User Tools

Site Tools


electrical:12v:alternator_details

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
electrical:12v:alternator_details [2025/02/26 11:28]
frater_secessus [Heavy duty / high output] big three addition
electrical:12v:alternator_details [2025/02/26 11:29] (current)
frater_secessus [Heavy duty / high output]
Line 282: Line 282:
 Note that increasing alternator output may require upgrading stock chassis wiring.  Often called "the Big Three": Note that increasing alternator output may require upgrading stock chassis wiring.  Often called "the Big Three":
  
- - POS from alternator to starter battery +  - POS from alternator to starter battery 
- - NEG from starter battery to chassis +  - NEG from starter battery to chassis 
- - NEG from chassis to engine block+  - NEG from chassis to engine block
  
 >> To run a [high output] alternator, ALL of your engine's factory high current cabling will need to be [sized] to support it, including engine and starting battery grounds, and alternator positive. -- MechEngrSGH((https://www.irv2.com/forums/f87/alternator-burn-out-from-lithium-batteries-558284-8.html#post6428559)) >> To run a [high output] alternator, ALL of your engine's factory high current cabling will need to be [sized] to support it, including engine and starting battery grounds, and alternator positive. -- MechEngrSGH((https://www.irv2.com/forums/f87/alternator-burn-out-from-lithium-batteries-558284-8.html#post6428559))
electrical/12v/alternator_details.txt · Last modified: 2025/02/26 11:29 by frater_secessus