User Tools
electrical:12v:voltage_sensing_delay
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
electrical:12v:voltage_sensing_delay [2021/04/15 10:43] frater_secessus |
electrical:12v:voltage_sensing_delay [2022/02/19 11:07] (current) frater_secessus |
||
|---|---|---|---|
| Line 8: | Line 8: | ||
| > it operates by sensing the voltage on the main 12 volt system. When this voltage goes above 13.3 volts for approximately 12 seconds... it will close the isolator relay providing charging current to the auxiliary battery.((https:// | > it operates by sensing the voltage on the main 12 volt system. When this voltage goes above 13.3 volts for approximately 12 seconds... it will close the isolator relay providing charging current to the auxiliary battery.((https:// | ||
| + | |||
| + | There are many kinds of [[https:// | ||
| Note that these can sense voltage on any circuit, not just the IGN circuit. | Note that these can sense voltage on any circuit, not just the IGN circuit. | ||
electrical/12v/voltage_sensing_delay.1618497796.txt.gz ยท Last modified: 2021/04/15 10:43 by frater_secessus
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
