User Tools

Site Tools


electrical:12v:alternator

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
electrical:12v:alternator [2025/06/23 15:42]
frater_secessus orton
electrical:12v:alternator [2025/09/27 06:04] (current)
frater_secessus [voltage-sensing relays]
Line 262: Line 262:
  
  
-Note:  [[electrical:12v:voltage sensing delay|voltages-sensing (with or without delay)]] can be added to plain solenoids.+Note:  [[electrical:12v:voltage sensing delay|voltage-sensing (with or without delay)]] can be added to plain solenoids.
  
 ==== lithium-specific VSR ==== ==== lithium-specific VSR ====
Line 271: Line 271:
  
 Note:  a normal VSR can be used with LiFePO4; it may be useful to add a way to [[electrical:12v:alternator#disabling_alternator_charging|disable temporarily]] it to break the "stuckness". Also see [[electrical:12v:alternator#gotchas|the Gotchas section]] for related information.  Note:  a normal VSR can be used with LiFePO4; it may be useful to add a way to [[electrical:12v:alternator#disabling_alternator_charging|disable temporarily]] it to break the "stuckness". Also see [[electrical:12v:alternator#gotchas|the Gotchas section]] for related information. 
 +
 +=== Victron Cyrix-Li-ct ===
 +
 +The [[https://amzn.to/4m8mE6f|Cyrix-Li-ct]] is similar to the lead version with different setpoints:((https://www.victronenergy.com/upload/documents/Datasheet-Cyrix-Li-ion-120-A-EN.pdf))
 +
 +  * cut-in 13.4v
 +  * cut-out <13.2v
 +
 +It can also communicate with Victron BMSes but that is beyond the scope of this article. 
 +
 +
  
 === Li-BIM === === Li-BIM ===
electrical/12v/alternator.1750693330.txt.gz ยท Last modified: 2025/06/23 15:42 by frater_secessus