User Tools

Site Tools


electrical:12v:b2b

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
electrical:12v:b2b [2025/04/29 00:51]
frater_secessus [Renogy]
electrical:12v:b2b [2025/04/29 00:55] (current)
frater_secessus [Renogy]
Line 163: Line 163:
 Note:  some have reported better alternator charging performance with the D+ (smart alternator) wire connected, even with plain alternators.  Oversizing cables from the alternator may also help. ((https://www.youtube.com/watch?v=LtIe2rIfpW8))  Note:  some have reported better alternator charging performance with the D+ (smart alternator) wire connected, even with plain alternators.  Oversizing cables from the alternator may also help. ((https://www.youtube.com/watch?v=LtIe2rIfpW8)) 
  
-== disconnecting the solar == +== preventing solar from hobbling the alternator side  == 
  
-Because of the behavior described above, people who want maximum alternator charging sometimes add a way to disconnect solar panels.  This is typically done by adding some kind of disconnect on the panel POS wire going to the solar charge controller:+Because of the behavior described above, people who want maximal charging can approach the problem one of two ways: 
 + 
 +**Max out the solar side** so it's never failing to make it's fair share.  This would be 400w of panel on the 30A and ~600w on the 50A. 
 + 
 +**Add a way to disconnect solar panels**.  This is typically done by adding some kind of disconnect on the panel POS wire going to the solar charge controller:
  
   * manual switch   * manual switch
electrical/12v/b2b.1745887863.txt.gz · Last modified: 2025/04/29 00:51 by frater_secessus