User Tools

Site Tools


electrical:solar:mppt_design

This is an old revision of the document!


MPPT integration

There are benefits from using higher voltage panels that can be realized when a system is designed for an MPPT controller. An MPPT controller can also be the centerpiece of a DIY converter.

input voltage

Input voltage is a balancing act between efficiency / heat reduction (requires lower input voltage), the ability to overcome self-consumption losses under all conditions (requires higher input voltage), wire size and length (higher input voltage), and shading mitigation (higher input voltage).

MPPT manufacturers always specify a maximum voltage coming into the controller; some also specify a minimum or optimium voltage.

  • Victron: Vpanel >= Vbatt + 5v to start MPPT, Vbatt + 1v thereafter.1)
  • Genasun (nominal 12 systems): 15-18v for constant power supplies2), ⇐ 27v for PV.3)
  • SNA (grid tied): Vpanel = desired output * 1.41424)
  • EpEver: Vpanel >= Vbatt +2v to start MPPT.5)
  • generic rule of thumb: Vpanel >= maxiumum Vbatt + 30%
  • generic rule of thumb: Vpanel ⇐ maximum Vbatt * 2.6)7).
electrical/solar/mppt_design.1626750418.txt.gz · Last modified: 2021/07/19 23:06 by frater_secessus