User Tools

Site Tools


electrical:12v:ports

This is an old revision of the document!


12v house power outlets

Full-timers and those with more robust system will likely want to install 12v power outlets in their van. Doing this means one can move electrical items around and plug them in where you want them.

the cigarette outlet

m.media-amazon.com_images_i_81u2v1sifkl._ac_uy218_ml3_.jpg The most common 12v outlet is the cigarette lighter outlet. The version shown here has USB outlets built in, also.

Pro:

  • universal1)

Con:

If you must use a ciggy port considering plugging in a wired extension/splitter as a sacrificial lamb. *When* the port dies it will be the replaceable extension and not the built-in port. The *wired* part is important, since it will flex and place no strain on the port.

other connector types

Advanced users often cut off the ciggy plug and use something superior for their needs.

Anderson

m.media-amazon.com_images_i_41u3vf1-mcl._ac_uy218_ml3_.jpg The most common non-ciggy connector is the Anderson Powerpole.

Pro:

  • when assembled correctly, polarity is assured even when you aren't looking
  • slide together in pairs in different arrangments and directions
  • robust, especially for frequent connects/disconnects
  • power distribution blocks can be very neat and small

Con:

  • more $$$
  • need to be assembled2)
  • the different possible arrangements means you'll need to pick an arrangement and stick to it
  • a special crimper is recommended
1)
although there are proprietary versions like the DIN Hella found in BMW motorcycles and some European vehicles, etc
2)
pin on wire, pin into connector, neg/pos connectors mated together
electrical/12v/ports.1625690302.txt.gz · Last modified: 2021/07/07 16:38 by frater_secessus