User Tools
electrical:12v:voltage_sensing_delay
This is an old revision of the document!
Adding voltage-sensing to an ignition-triggered device
Solenoids and some DC-DC chargers use a circuit powered when the ignition is on (IGN) to start their operation. Voltage-Sensing Relays (VSR) do this by reading voltage to know when alternator charging1) is occurring.
Voltage-sensing can be added to devices that lack it by adding a a relay-delay.2). Note that the relay-delay can sense voltage on any circuit, not just the IGN circuit.
1)
or some other form of charging
electrical/12v/voltage_sensing_delay.1618496789.txt.gz · Last modified: 2021/04/15 10:26 by frater_secessus
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
